The Energy Compliance Information Certificate sticker has been updated to conform to the newly adopted 2015 IECC. The sticker can be used to comply with Section 401.3 of the Houston Energy Code or, if preferred, a builder can use their own compliance sticker. After it is completed and printed, the certificate must be attached inside the electrical panel. This sticker can be printed on Avery® Labels 6876.

Last updated: February 20, 2025

• 02632-09  Storm Sewer Type "E" Inlet
• 02632-10  Storm Sewer Type "E" Inlet On Existing Monolithic Conc. Sewers of 48" Diameter & Greater

• 02081-05  Storm Sewer Manhole Type "E" For Existing Monolithic
• 02081-06  Storm Sewer Junction Box With Lid Or Grate
• 02081-07  Lateral Connection To Existing Monolithic
• 02081-08  Proposed Manhole On Existing Box

List of Standard Details – Storm Sewer Details  

Last Updated: 5-23-2024

• 02317-03  Sanitary or Storm Sewer Bedding and Backfill for Dry Stable Trench
• 02317-05  Precast Concrete Box Storm Sewer Bedding and Backfill for Dry Stable Trench
• 02317-06  Precast Concrete Box Storm Sewer Bedding and Backfill for Wet Stable Trench
• 02317-07  Precast Concrete Box Storm Sewer Bedding and Backfill with Seal Slab

• 02632-06   Sewer Type "C-1", "C-2" And "C-2A" Inlet
• 02632-07  Storm Sewer Type "D" Inlet
• 02632-08  Storm Sewer type "D-1" Inlet

Drawing 02082-13 Storm Sewer Precast Box Manhole (effective November 27, 2023)

Last updated: November 26, 2023

Drawings 02081-01 to 04 (2020 Details)

• 02081-01  Storm Sewer Manhole Type "C" for 42" Diameter RCP and Smaller
• 02081-02  Storm Sewer Manhole Type "C" for 48" to 72" Diameter RCP
• 02081-03  Storm Sewer Manhole Type "C" for 78" Diameter RCP and Greater
• 02081-04  Storm Sewer Manhole Type "C" for Proposed Concrete Box Sewer

• 02084-09  Storm Sewer Type "C-1", "C-2" And "C-2A" Inlet Frame and Cover
• 02084-10  32” Inverted Manhole Frame
• 02084-11  Storm Sewer Ring Grate for Open End of 18” to 72” RCP Stubs to Ditch
• 02317-02  Sanitary or Storm Sewer Crushed Stone Foundation for Wet Stable Trench

When the Residential Energy Code requires energy testing (air leakage and duct leakage tests), the results must be documented using this form. The testing must be done by an independent third party energy technician registered with the City of Houston. The results will need to be submitted to the Mechanical Inspector at the final inspection. If more than 3 systems are installed, please fill out an additional form.

Last updated: 01-30-2024