Use a mixture of filters or keywords to find documents and resources by department, type or topic.

Stationary Engineer License Requirements (CE1221)

Stationary Engineer License Requirements.

Last updated: February 2026

Approved Fabricator Guidelines (CE1285)

The guide explains the requirements and procedures of the City of Houston-approved fabricator program. 

Last updated: February 20, 2026

Drawings 02632-04 to 02632-05
  • 02632-04 Storm Sewer Type "B-B" Inlet
  • 02632-05 Storm Sewer Type "B" Inlet Relocation
02081-01 Through 04

Drawings 02081-01 to 04 (2020 Details)

  • 02081-01  Storm Sewer Manhole Type "C" for 42" Diameter RCP and Smaller
  • 02081-02  Storm Sewer Manhole Type "C" for 48" to 72" Diameter RCP
  • 02081-03  Storm Sewer Manhole Type "C" for 78" Diameter RCP and Greater
  • 02081-04  Storm Sewer Manhole Type "C" for Proposed Concrete Box Sewer
TxDOT Sanitary Sewer Details
Swimming Pool Demolition Guidelines (CE1090)

The following detail and specifications, issued in conjunction with the Department of Neighborhoods and Health Department, identifies requirements for the demolition of swimming pools and spas; including, but not limited to, pools determined to be in violation of the City of Houston Minimum Standards or Dangerous Building Ordinance.

Last updated: January 2026

Sponsor Change Form

Sponsor change form for small water meters between 5/8-inch and 2-inches in size.
Last update: 03/01/2024.

Post Install Solar Inspection Letter (CE-1387b)

This is an example inspection letter for a Solar APP+ project. For an example of a typical solar panel system, refer to form CE-1387a.

Last updated: Nov. 17, 2022 

Post Install Solar Inspection Letter (CE-1387a)

This is an example of an inspection letter for a typical solar panel system. For a Solar APP+ project, refer to form CE-1387b.

Last updated: Nov. 17, 2022

Drawings 02632-09 To 02632-10
  • 02632-09  Storm Sewer Type "E" Inlet
  • 02632-10  Storm Sewer Type "E" Inlet On Existing Monolithic Conc. Sewers of 48" Diameter & Greater