When the Residential Energy Code requires energy testing (air leakage and duct leakage tests), the results must be documented using this form. The testing must be done by an independent third party energy technician registered with the City of Houston. The results will need to be submitted to the Mechanical Inspector at the final inspection. If more than 3 systems are installed, please fill out an additional form.

Last updated: 01-30-2024

Prerequisites Plan Procedures.

This guide provides an overview of the qualifications and submittal requirements for projects that wish to establish a Live-Work unit through the Occupancy Inspection Section.

Last updated: 10/22/2024

Last updated: June 09, 2025

The Energy Compliance Information Certificate sticker has been updated to conform to the newly adopted 2015 IECC. The sticker can be used to comply with Section 401.3 of the Houston Energy Code or, if preferred, a builder can use their own compliance sticker. After it is completed and printed, the certificate must be attached inside the electrical panel. This sticker can be printed on Avery® Labels 6876.

Last updated: February 20, 2025

A general overview of the residential building permit process. This presentation will outline the basic steps involved in submitting plans for review, obtaining permits, and scheduling inspections for one and two-family dwellings.

Last updated: 5/22/2023

For reroof only commercial projects. 

Last updated: April 2024

Summary of Sidewalk and Roadway Obstructions and Impairments Ordinance

Last updated: 03/08/2024

This document is a brief overview of the typical commercial building permit process for the City of Houston. Links are added for reference. Please contact Building Code Enforcement for assistance with specific questions pertaining to your individual project: 832.394.9494. Presentation, May 31, 2007.

Last updated: February 2024