Use a mixture of filters or keywords to find documents and resources by department, type or topic.
The Energy Compliance Information Certificate sticker has been updated to conform to the newly adopted 2015 IECC. The sticker can be used to comply with Section 401.3 of the Houston Energy Code or, if preferred, a builder can use their own compliance sticker. After it is completed and printed, the certificate must be attached inside the electrical panel. This sticker can be printed on Avery® Labels 6876.
Last updated: February 20, 2025
This is a permit application for a fire alarm within the city limits of Houston, Texas. Carefully complete all necessary information.
Last updated: January 2026
Complete this form for permit and inspection of Type 1 Hood fire suppression systems (FSS), or when submitting plans for fire alarm, fire sprinkler, or underground fire lines, or when requesting a Go to Work permit.
Last updated: January 2026
This guide provides the requirements for demolition of dangerous buildings.
Last updated: 04-03-2025
When the Residential Energy Code requires energy testing (air leakage and duct leakage tests), the results must be documented using this form. The testing must be done by an independent third party energy technician registered with the City of Houston. The results will need to be submitted to the Mechanical Inspector at the final inspection. If more than 3 systems are installed, please fill out an additional form.
Last updated: 01-30-2024
This guide provides an overview of the qualifications and submittal requirements for projects that wish to establish a Live-Work unit through the Occupancy Inspection Section.
Last updated: 10/22/2024
Last updated: 03/08/2024
This acknowledgement must be completed by the licensee and submitted to the Fire Marshal’s Office prior to scheduling a final inspection.
Last updated: 01/01/2023
This guide provides the requirements for repairing dangerous buildings.
Last updated: 04-03-2025