Use a mixture of filters or keywords to find documents and resources by department, type or topic.

02526-15 Schematic Basement Installation Electromagnetic Meter 3-inch Thru 10-inch
02526-15 Schematic Basement Installation Electromagnetic Meter 3-inch Thru 10-inch
02526-16 Schematic Above Ground Fire Rated Compound Meter Installation
02526-16 Schematic Above Ground Fire Rated Compound Meter Installation
02526-04 Typical Piping Arrangement 6-inch Turbine Compound Meter
02526-04 Typical Piping Arrangement 6-inch Turbine Compound Meter
02526-17 Schematic Above Ground Electromagnetic Meter Installation
02526-17 Schematic Above Ground Electromagnetic Meter Installation
02085-02 Location Of Water Meter Box For 2 Diameter Less
02085-02 Location Of Water Meter Box For 2 Diameter Less
02085-03 Valve Box Detail
02085-03 Valve Box Detail
02511-02 Thrust Block Detail For Water Lines
02511-02 Thrust Block Detail For Water Lines
01 Technical Memo, U-Code vs I-Code.pdf

This technical memo is to provide an overview on the decision between choosing the Uniform Mechanical Code (UMC) vs. the International Mechanical Code (IMC). The Construction Code Modernization (CCM) and the Customer Assistance and Code Development (CACD) staff, alongside Jensen Hughes, reviewed and compared the two codes for consideration to adopt the IMC during this code modernization.

 

Uploaded 2-13-2024

01 Technical Memo, U-Code vs I-Code.pdf
2015 IRC Code Comparison SC - Final

Comparison of the 2012 IRC and 2015 IRC Houston Amendments. 

Last updated: 03/22/2022

2015 IRC Code Comparison SC - Final
16 Technical Memo, Occupant Load Factor Changes.pdf

This technical memo is provided to describe the changes to the Houston Construction Codes with regards to a significant change in the base code related to the requirements for occupant load factors. 

Uploaded 2-13-2024

16 Technical Memo, Occupant Load Factor Changes.pdf