Boiler Repair (Commercial)
Repairs, changes, or alterations made to an existing boiler that is used to heat a building or that is used in for commercial processing is subject to Houston's boiler regulations. This includes all boilers except those used exclusively for producing domestic (potable) hot water.
Plan review may be required depending on the scope of work.
No license required.
To apply for a mechanical permit online:
- Log in or register for an iPermits account,
- Complete a mechanical permit application in the iPermits portal,
- Pay any applicable fees associated with the application, and
- Print the permit.
NOTE: If the mechanical permit is associated with a dangerous building or habitability project, a Mechanical Permit Application must be completed and submitted via email at [email protected].
Only Available to Advance Pay Account holders
To apply for a mechanical permit by fax, please have your registered mechanical contractor send a completed copy of the CE-1017 Mechanical Building Permit Application to 832.395.9601.
NOTE: The submittal, review and approval of plans may be required for some types of projects. Please contact the Mechanical Section at 832.394.8850 or [email protected] for more information.
All plans must be submitted electronically. To submit your plans for review, follow these steps:
1. Log in or register for an iPermits account.
2. Complete a permit application in the iPermits portal.
3. Pay any applicable fees associated with the application.
4. After permit fees have been paid, you will receive an invitation to upload plans into ProjectDox.
5. Upload all required documents and drawings to ProjectDox.
6. Mark the assigned task "complete" to finalize your plan submission.
For a complete and detailed list of steps, please refer to the EPR User Guides at https://www.houstonpermittingcenter.org/our-services/eservices.
Please keep a copy of the permit and the approved copy of the plans (if applicable) on-site for inspection. If corrections are required, you will need to reschedule the inspection.
To schedule an inspection online:
1. Access our scheduling website through the link below.
2. Enter the appropriate project number into the field and click the Submit button.
3. Select the appropriate permit type from the drop-down box and click the Submit button.
4. Click on the "Request" link.
5. Select the type of inspection(s) that you wish to schedule by clicking on the text box besides it/them.
6. Enter your license number (digits only) and scheduling PIN number and click the Submit button.
In order to schedule an inspection, the mechanical contractor's license registration must be in good standing.
Prior to scheduling an inspection, please make sure that the permit is not inactive and that all holds (if any) have been approved.
Please note that inspections that repeatedly fail may be charged a re-inspection fee in addition to an admin fee.