Use a mixture of filters or keywords to find documents and resources by department, type or topic.

09C13 Interior Steel Partition (Fire Rated – 1 HR)

The following drawing is an example of typical construction and can be used as a reference.

NOTE: This is not an engineered drawing.  

22-07-R Residential Framing Cross Section Template

The template drawing is to assist in the preparation of plans for residential remodeling and addition projects.

Revised 11-15-2022

17-10-C Repair of Flooded 2-Hour Fire Wall

The following drawing is an example of typical construction and can be used as a reference.

NOTE: This is not an engineered drawing.  

Sprinkler Go-to-Work Permit Guideline (CE1260)

By state law, sprinkler plans must be designed by a licensed sprinkler contractor. Typically, the sprinkler contractor is selected by the general contractor after the construction documents have been submitted for permit or the building permit has been issued. As a result, sprinkler drawings are designed and submitted after the building plans are reviewed and construction has commenced.

Last updated: 01-01-2024

Pedestrian Protection Permit Guideline (CE1124)

This guide outlines the permit and the plan review process associated with erecting scaffolding and other structures to serve as pedestrian protection during construction, repairs, and demolition projects.

Last updated: 01-01-2023

18-13-R Residential Non Fire-Rated Stucco Details (Wood Frame)

The following drawing is an example of typical construction and can be used as a reference.

NOTE: This is not an engineered drawing.  

08C10 Interior Wood Partition

The following drawing is an example of typical construction and can be used as a reference.

NOTE: This is not an engineered drawing.  

08C11 Commercial Door Schedule

The following drawing is an example of typical construction and can be used as a reference.

NOTE: This is not an engineered drawing.  

13-01-R Swimming Pool Demolition

The following drawing is an example of typical construction and can be used as a reference.

NOTE: This is not an engineered drawing.  

08C09 Interior Steel Partition (Revision 1)

The following drawing is an example of typical construction and can be used as a reference.

NOTE: This is not an engineered drawing.